RootX Application Tips

Clears Septic Tank Roots

RootX is registered for use in all 50 states for use in sewer and storm lines.

Our EPA registration number is 68464.1. 

And it's guaranteed effective!

_______________

- 2LB $28.95 
- 4LB $53.50 
- 6LB $75.00

If you must cut out the roots before application, RootX must be applied immediately, (within the first hour), or you will need to wait 6-8 weeks.  The reason for this is that as soon as roots are damaged or cut, they start secreting sap.  The sap will build up enough to become a barrier between the chemical and the wood tissue within 2-4 hours.  By waiting 6-8 weeks, you will have given enough time for the roots to grow back through the sap, thus allowing for the RootX to come in contact with the wood tissue.

If RootX Foam gets on any carpet, do not apply any cleaning detergent.  Allow the foam to dry and vacuum it up.  Otherwise, discoloration may result.

Always pour the entire amount of RootX you will use at the same time in the same location.

TOILET APPLICATION
Step 1:  Gather your materials.  RootX, bucket, stir stick, complimentary latex gloves.

    NOTE:  Use ONLY a 2 Lb. jar of RootX as a 4 Lb. jar will overflow the toilet.

Step 2:  Empty the contents of the RootX jar into the bucket.  Look for the paper divider that separates the two RootX chemicals and discard it.

Step 3:  Mix Well.  Mix the dry contents of the RootX jar completely.  It is important that the two parts of the RootX canister mix thoroughly. Thorough mixing insures optimal foaming and root coating.

Step 4:  Test the flush time of the toilet.  Since RootX foams on contact with water, it is important to know how fast the toilet bowl drains, so you don't run the risk of overflowing the bowl with foam.  If the flush time is slow, use method A, (below).  If the flush time appears normal, the preferred method is B, (below).
    Method A:  Flush while you are poring
    RootX into the bowl
    Method B:  Immediately after pouring
    RootX into the toilet bowl - flush!

Step 5:  With your method of flushing in mind, por the RootX mixture into the toilet bowl.

    NOTE:  Use Either a 2 Lb. or 4 Lb. jar of RootX.

Step 2:  Empty the contents of the RootX jar into the bucket.  Look for the paper divider that separates the two RootX chemicals and discard it.

Step 3:  Mix Well.  Mix the dry contents of the RootX jar completely.  It is important that the two parts of the RootX canister mix thoroughly. Thorough mixing insures optimal foaming and root coating.

Step 4:  Pour the RootX down the clean out valve.

    NOTE:  Do NOT add water to the bucket, just pour in the dry mixture.

Step 5:  Pour three to five (3 to 5) gallons of water down the clean-out after the RootX.  You should observe some foaming in the pipe.

Remember to restrict water usage from four to six (4 to 6) hours after treatment to assure full absorption of the RootX into the roots.

Cut out the Cost of a Middle-Man:
We are a Factory Authorized
RootX Distributor

2 LBS. & 4 LBS. Containers
Free Complimentary Latex Gloves 

_______________

Testimonials

"Your product saved my budget thousands of dollars..."

- M. Bean, Evansville Housing Authority

"RootX is a staple in our service business."

- Joe McPerson, Kogge, Inc.

"We find (RootX) to be a cost-effective aid in our continuing root abatement program."

- Robert D. Mills, Wastewater Collections Supervisor,  Kitsap County, WA

Return to the
RootX Main Page

PLEASE CALL OUR OFFICE WITH ANY QUESTIONS OR PROBLEMS
1-818-292-6632

Cut out the Cost of a Middle-Man:
We are a Factory Authorized
RootX Distributor

2 LBS., 4 LBS. or 6 LBS.
Choose your amount based on what you need
Free Complimentary Latex Gloves 
VIEW OUR PROPRIETARY QUANTITY CHART
2LB $28.95 - 4LB $53.50 - 6LB $75.00

_______________